V-System 3000 HEPA Cyclone Dust Collector
- Industrial 230V U.S. made fan motor provides ample CFM for up to 2 tools at once with 4"-6" dust ports. Includes RF remote control starter.
- High efficiency cyclone (over 99% separation) with smooth, compound molded surface.
- Ultra-quiet noise level with included sound filters - only 74 dBA at 10 feet.
- 35 gallon dust bin with quick-release lid and automatic fill level indicator.
- 3rd party tested HEPA filtration with non-stick membrane for easy cleaning.
- Durable, lightweight construction allows for quick and easy installation.
Compact, Configurable Design
This unit is equipped with a Freestanding Leg Kit and has been built specifically to fit underneath standard 8 foot ceilings; perfect for garage or basement shops!
|Motor Type||U.S. Leeson® TEFC Motor|
|Motor Service Factor||1|
|Recommended Breaker Size||20A|
|Power Connector||NEMA 6-20|
|Power Cord Length||10 feet|
|Impeller Type||Single-piece, backward inclined, non-sparking/non-ferrous|
|Impeller Size||15" Dia.|
|Real CFM Rating||1,349 Actual CFM at 2.3" WC|
|Free Fan CFM Rating||2,940 CFM|
|Maximum Suction||13" WC|
|Max. Open Blast Gates||2 Gates|
|Noise Level||74dBA @ 10 ft|
|Filter Media Type||G.E. H12 HEPA|
|Filtration Efficiency||99.97% @ 0.3 microns|
|MERV Rating||MERV 16 ±|
|Total Filtration Area||95 sq ft|
|Waste Capacity||35 Gallon|
|Primary Build Materials||Galvanized Steel, SD Polyethylene|
|Static Resistance Rating||Static Dissipative|
|Inlet Size||7" OD|
|Outlet Size||Square ID: 7-3/8"(W) x 6-3/8"(H)|
|Discharge Size||7" Dia.|
|Height to Center of Inlet||63"|
|Contents||Blower Motor Assembly, Magnetic Starter, Fan Housing, Filter Plenum, Stacking Sound Filter, Internal Silencer, FlameGuard Cartridge Filter, Freestanding Leg Kit, Cyclone Separator, Steel Dust Bin, Bin Level Indicator, Remote Control, Hardware|
|Country of Manufacture||United States|
|Warranty Information||1 Year Limited Warranty|
|Applicable Patents||#7247180, #8377160, #8496719, #8514090, #9370740|
This can vary widely depending on how often your dust collector is used and what kind of dusts it's exposed to but you should typically clean it only once you've noticed a considerable drop in suction performance. In our experience this can be around once per year, but with heavy amounts of sanding it could be as often as once per month.
A meter such as our Filter Efficiency Gauge can also be used to monitor pressure buildup and inform you when the filter need's to be cleaned.
On the floor, the V-System's stand is a 30" x 30" square. How wide the overall system is depends on the orientation of your filter plenum. If the plenum is oriented ninety degrees clockwise from the system's inlet, then the overall width would be 47". Please refer to the owner's manual for more detailed dimensions.
With the stand, the V-System's overall height cannot be lower than 87" (for 1.5HP) or 88" (for 3HP). Oneida Air Systems does offer wall-mounting brackets for the V-System, available by phone order only. This would allow you to mount the V-System dust collector at a lower height for use with smaller containers. Please note that you may have to empty the smaller drum much more frequently depending on your workflow.
The V-3000 dust collector measures 88" tall. You can find more detailed dimensions by referencing the Owner's Manual, posted on the product page under the "Documents" tab.
Because the Dust Sentry works via an adjustable infrared sensor, this can sometimes trigger false positives with an empty container because of the reflective surface at the bottom of the steel drum.
This can be resolved by painting/coloring the inside bottom of the drum so that it is no longer reflective enough to affect the sensor.
Yes. The V-3000 dust collector can be operated at a voltage range of 208V to 230V in single phase.
Fire protection regulations are a complex and ever-changing set of rules that differ from facility to facility. Click the "read more" link to review our Best Practices for Dust Collection Fire Safety or contact us for more detailed assistance.