Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
XXK100300-460-255
10hp 460V Direct Drive Industrial 110 Gal. Cyclone Dust Collector
$11,990.00
Industrial dust collection system for large commercial shops - suitable for collecting from multiple 4"-6" dust ports simultaneously. Includes modular stacking filter system with efficiency gauge to alert the operator for cleaning. Full-welded, steel cyclone separator captures and removes fine dust and bulk debris from the airstream to provide continuously high suction power, reducing filter maintenance downtime, and containing the dust within two 55 gallon steel dust bins.
Products Recommended For You
Check items to add to the cart or
Realize the Power of American Manufacturing
Our 10HP Direct Drive system is the workhorse of our industrial line of cyclonic dust collection systems - delivering maximum airflow performance within a compact, quiet, and cost-effective package. Built to last a lifetime using industrial, heavy-gauge steel components, our 10HP is ideal for commercial shops with fixed ductwork and multiple tools in use simultaneously.
Included Features & Components
- Industrial 10HP U.S. Made Motor
- Backward Inclined, Non-Sparking, Cast-Aluminum Impeller
- High-Efficiency 460V / 3-Phase Power (Need 230V?)
- Magnetic Starter with Overload Protector
- Heavy-Gauge Solid Welded Steel Cyclone Separator with Clean-Out Access Door
- Modular Stacking Spunbond Cartridge Filters
- Real-time Filter Efficiency Pressure Gauge
- Drop-In Acoustic Foam Filter Silencers
- Industrial Angle Iron Frame Stand
- Dual 55-Gallon Reinforced Steel Drums
- 2 Year Limited Warranty
- cETLus Certified and NFPA Compliance Ready
Continuously High Airflow Performance
Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.
Motor Features:
- High-efficiency, fan blower motor - Made in USA.
- Industrial-grade brushless motor designed for continuous duty.
- Uses 3-phase power for commercial applications.
- Includes grease fittings for easy maintenance.
- Low pitch noise level provides ideal operator comfort.
- Heavy-gauge steel fan housing, full seam welded, built to last a lifetime.
Ultra-High Efficiency Steel Cyclone Separator
Features Oneida Air Systems' unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.
Cyclone Features:
- Removes up to 99% of fine dust and bulk debris from the airstream, before it reaches the filter.
- Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
- Significantly extends the lifespan of the filter and reduces downtime needed for maintenance.
- Rectangular, neutral-vane inlet with 10" dia. square-to-round adapter.
- System's inlet and outlet rotate independently at 45 degree increments to suit your shop's needs.
- Industrial 16 gauge steel construction with full welded, airtight seams.
- Highly durable, rust preventative, almond-white powder coat finish.
High Quality & Serviceable Filtration
Our industrial Direct Drive systems use spunbond polyester cartridge filters that are specifically designed for dust collection applications - providing unbeatable airflow and filtration performance - and are proudly made in the USA!
Filter Features:
- We stand by the quality and performance of our filters; Each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
- When fully seasoned, the spunbond filter media is rated as 99.9% efficient with particles ranging 0.3 – 2.0 microns* in size (Learn More)
- Wide-spaced pleating resists clogging and facilitates quick and easy maintenance.
- Patented filter stacking system provides the same filtration area as a single, larger filter, but without the cumbersome weight and installation.
- Patented internal acoustic foam silencers reduces noise caused by air vibrations by 1–2 dBa
- Includes Filter Efficiency Performance Gauge that takes the guesswork out of filter maintenance.
* The filtration efficiency ranges described here are for a filter that has been fully seasoned over the course of several dust loads and cleanings.
| SKU | XXK100300-460-255 |
|---|---|
| Horsepower | 10 hp |
| Motor Type | U.S. TEFC Motor |
| Motor Service Factor | 1.15 |
| Voltage | 460V |
| Amperage (Typical) | 12.1A |
| Motor FLA | 12.1 |
| Phase Option | Three-Phase (Pre-Wired) |
| Frequency | 60Hz |
| Power Connector Type | 4 Bare Wires |
| Impeller Type | Backward inclined, welded carbon steel |
| Impeller Size | 17" Dia. |
| Real CFM Rating | 3,800 Actual CFM at 2.3" S.P. |
| Noise Level | 84-85 dBA @ 10 ft |
| Motor Speed Type | Fixed |
| Filter Type | Izumi Axtar Spunbond Media |
| Filtration Efficiency | 99.9% at 0.3–2.0 microns* (with seasoned filter, more info) |
| Total Filtration Area | 465 sq ft |
| Replacement Filter | #FCK186200 |
| Waste Capacity | 110 Gallons |
| Remote Control | Sold Separately |
| Remote Control Part # | Call for info |
| Primary Build Materials | Cold Rolled Steel |
| Welding | Seam Welded |
| Static Resistance Rating | Conductive (Metal) |
| Color | White |
| Inlet Size | Round: 12" I.D. Square ID: 8"(W) x 14"(H) Square OD: 10-1/2"(W) x 16-1/2"(H) |
| Outlet Size | Square ID: 12-1/2"(W) x 10"(H) |
| Discharge Size | 10" I.D. Flange |
| Width | 122" (Total) 64-5/8" (Footprint) |
| Depth | 54" (Total) 38" (Footprint) |
| Height | 145" (at Position 2) |
| Height to Center of Inlet | 113" (at Position 2) |
| Actual Weight (lbs) | 1060 |
| Contents | Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Square-to-Round Inlet Adapter, Filter Plenum, 6x Modular Cartridge Filters, Filter Efficiency Gauge, Angle Iron Stand, Pants Wye Splitter, 2x Steel Dust Bins, Hardware |
| Manufacturer | Oneida Air Systems |
| Manufacturer Statement | Made in USA |
| Warranty Information | 2 Year Limited Warranty |
| Certifications | NFPA Compliance Ready (See Reference Guide). cETLus certified to both U.S. and Canadian product safety standards by an NRTL. Conforms to UL-1017 and Can/CSA-C22.2 No. 243 standards. |
| Proposition 65 | WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. |
We found other products you might like!
This Items Ships Freight Via Common Carrier
Due its large size and weight, this product must be shipped by freight carrier. Additional fees required for residential addresses and remote, isolated destinations. Our service department will call you after your order has been booked to bill the additional freight fees. You can contact us prior to ordering for a free freight quote.